Microencapsulated Adhesives

3M™ 2353 is a specially formulated two part epoxy system in a micro-encapsulated form. Inert and dry to touch until activated during assembly, it provides a high resistance to loosening by virtue of the high breakloose/breakaway torques and subsequent prevailing off torque and achieves full adhesive strength after 24 hours cure at ambient temperature. The high strength locking and sealing performance of 2353 makes it suitable for all fastening applications up to 150°C. This product can be applied to a variety of materials such as brass, steel, copper and plastic. 2353 can be applied to most engineering surface finishes. 2353 has very good sealing properties, impervious to most commonly used chemicals and liquids such as water, oil, grease etc.

3M™ 2510 is specifically designed to operate at elevated temperatures up to 200°C. 2510 is a two part epoxy system in micro-encapsulated form. Inert and dry to touch until activated during assembly, it provides high strength/high temperature performances achieving full adhesive strength after 72 hours cure at ambient temperature. 2510 has very good sealing properties, impervious to most commonly used chemicals and liquids such as water, oil, grease etc.

Precote® 80 is a dry to touch, micro-encapsulated thread precoating system with an acrylate base. The dry film is non-tacky, solvent free and is harmless from both a physiological and toxicological point of view. Its characteristics as a high strength locking and sealing element become effective after the capsules are ruptured during assembly with the mating threads. adhesive)

Precote® 30 is a micro-encapsulated thread precoating system with an acrylate base. The dry film is non-tacky, solvent-free and is harmless from the physiological and toxicological point of view. Its characteristics as a sealing and locking element with medium strength become effective on assembly, after the capsules are ruptured by shear and/or pressure stress.